|
DIN-51068-1
|
1976
|
Testing of Ceramic Materials; Determination of Resistance to Thermal Shock; Water Quenching Method f
|
|
DIN-5107
|
1976
|
Blacksmith's Chisels; Cold Chisels December
|
|
DIN-51075-1
|
1982
|
Testing of Ceramic Materials; Chemical Analysis of Silicon Carbide; Sample Preparation and Calculati
|
|
DIN-51075-2
|
1984
|
Testing of Ceramic Materials; Chemical Analysis of Silicon Carbide; Direct Determination of the Free
|
|
DIN-51075-3
|
1982
|
Testing of Ceramic Materials; Chemical Analysis of Silicon Carbide; Determination of the Total Carbo
|
|
DIN-51075-4
|
1982
|
Testing of Ceramic Materials; Chemical Analysis of Silicon Carbide; Determination of the Free Silico
|
|
DIN-51075-5
|
1982
|
Testing of Ceramic Materials; Chemical Analysis of Silicon Carbide; Indirect Determination of the Fr
|
|
DIN-51076-1
|
1991
|
Determination of Silicon Carbide; in Ceramic Materials Containing Oxidic Constituents and Binders (A
|
|
DIN-51078
|
1996
|
Preparation of Refractory Samples for Chemical Analysis and for Determining the Change in Mass on Dr
|
|
DIN-51079-1
|
1991
|
Determination of Silicon Carbide; as a Raw Material or a Constituent of Ceramic Materials by Digesti
|
|
DIN-51083-11
|
1996
|
Determination of Barium Oxide (BaO) and Strontium Oxide (SrO) in Fine Ceramic Aluminosilicates by At
|
|
DIN-51083-5
|
1997
|
Determination of Titanium(IV) Oxide in Fine Ceramic Aluminosilicates March
|
|
DIN-51085
|
1997
|
Determination of Total Sulfur in Oxidic Materials March
|
|
DIN-51167
|
1985
|
Testing of Vitreous and Porcelain Enamels; Determination of Crack Formation Temperature in the Therm
|
|
DIN-51172
|
1986
|
Vitreous and Porcelain Enamels for Aluminium; Production of Specimens for Testing (Oct)
|
|
DIN-51173
|
1986
|
Testing of Vitreous and Porcelain Enamels; Determination of the Adhesion of Enamels on Aluminium Und
|
|
DIN-51174
|
1988
|
Corrosion Testing of Enamel in Closed Systems (May)
|
|
DIN-51200
|
1985
|
Materials Testing Machines; Design and Application of Test Piece Holding Devices in Hardness Testing
|
|
DIN-51201
|
1961
|
Testing of Wire Ropes (Mar)
|
|
DIN-51211
|
1978
|
Testing of Metallic Materials; Reverse Bend Test of Wires (Sept)
|
|
DIN-51212
|
1978
|
Testing of Metallic Materials; Torsion Test of Wires (Sept)
|
|
DIN-51213
|
1970
|
Testing of Metallic Coatings on Wires; Coatings of Tin or Zinc (Dec)
|
|
DIN-51214
|
1977
|
Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens (Feb)
|
|
DIN-51215
|
1975
|
Testing of Metallic Materials; Wrapping Test for Wires; General Information (Sept)
|
|
DIN-51220
|
1996
|
General Requirements for Materials Testing Machines, Including Verification and Calibration (Jan); (
|
|
DIN-51221-1
|
1993
|
Tensile Testing Machines; General Requirements (July) (Together with DIN EN 10002-4. January 1995 Ed
|
|
DIN-51221-2
|
1993
|
Tensile Testing Machines; Special Requirements and Equipment (July)
|
|
DIN-51221-3
|
1980
|
Material Testing Machines; Tensile Testing Machines; Small Tensile Testing Machines (June) (Together
|
|
DIN-51222
|
1995
|
Pendulum Impact Testing Machines with a Rated Initial Potential Energy of 50 J or Less (June) (This
|
|
DIN-51223
|
1994
|
Compression Testing Machines; Requirements (July) (Together with DIN EN 10002 PT 2, July 1993 Editio
|
|
DIN-51224
|
1985
|
Materials Testing Machines; Hardness Testing Machines with a Depth-Measuring Device (Jan) (Supersede
|
|
DIN-51226
|
1977
|
Material Testing Machines; Creep Testing Machines for Tensile Stress of Metallic Materials (Dec)
|
|
DIN-51228
|
1993
|
Fatigue Testing Machines General Requirements (July) (Together with DIN EN 10002 PT 2, July 1993 Edi
|
|
DIN-51230
|
1977
|
Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact St
|
|
DIN-51231-1
|
2000
|
Testing Installations for Building Components; Floor Slabs or Beams (July)
|
|
DIN-51232
|
1993
|
Testing Machines for Static Testing of Springs; General Requirements (July) (Together with DIN EN 10
|
|
DIN-51233
|
1995
|
Safety Requirements for Materials Testing Machines November
|
|
DIN-51290-1
|
1991
|
Testing of Polymer Concrete for Use in Mechanical Engineering; Terminology (May)
|
|
DIN-51290-2
|
1991
|
Testing of Polymer Concrete for Use in Mechanical Engineering; Testing of Binders, Fillers and Ready
|
|
DIN-51290-3
|
1991
|
Testing of Polymer Concrete for Use in Mechanical Engineering; Testing of Specimens Prepared in Moul
|
|
DIN-51290-4
|
1991
|
Testing of Polymer Concrete for Use in Mechanical Engineering; In-Process Testing of Components (May
|
|
DIN-51300
|
1993
|
Verification of Materials Testing Machines; General (Dec); (Superseded by DIN 51220)
|
|
DIN-51301
|
1986
|
Materials Testing Machines; Verification of Materials Testing Machines with the Aid of Static Force
|
|
DIN-51302-1
|
1993
|
Verification of Tensile, Compression and Bend Testing Machines; Principles (July) (Together with EN
|
|
DIN-51302-2
|
1986
|
Materials Testing Machines; Verification of Tensile, Compression and Bend Testing Machines; Suppleme
|
|
DIN-51303
|
1983
|
Material Testing Machines; Standardized Blocks for the Verification of Static Hardness Testing Machi
|
|
DIN-51304
|
1983
|
Material Testing Machines; Verification of Hardness Testing Machines Fitted with Indentation Depth M
|
|
DIN-51305
|
1983
|
Material Testing Machines; Verification of Hardness Testing Machines Fitted with an Optical Indentat
|
|
DIN-51306
|
1983
|
Material Testing Machines; Verification of Pendulum Impact Testing Machines (Sept) (Superseded by DI
|
|
DIN-51308
|
1994
|
Verification of Force Measuring and Force Application Systems Used in Construction (June)
|
