|
IEEE-C50.12
|
2000
|
Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator Motors for Hydraulic Turbine Appli
|
|
IEEE-C50.13
|
2000
|
Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
|
|
IEEE-C50.14
|
2000
|
Requirements for Combustion Gas Turbine Driven Cylindrical Rotor Synchronous Generators
|
|
IEEE-C57.100
|
2000
|
Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Pow
|
|
IEEE-C57.104
|
1991
|
Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers(ANSI/IEEE)
|
|
IEEE-C57.105
|
2000
|
Guide for Application of Transformer Connections in Three-Phase Distribution Systems
|
|
IEEE-C57.106
|
2002
|
Guide for Acceptance and Maintenance of Insulating Oil in Equipment(ANSI/IEEE)
|
|
IEEE-C57.109
|
2000
|
Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
|
|
IEEE-C57.110
|
2000
|
Recommended Practice for Establishing Liquid-Filled and Dry- Type Power and Distribution Transformer
|
|
IEEE-C57.111
|
2000
|
Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
|
|
IEEE-C57.113
|
2000
|
Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt
|
|
IEEE-C57.114
|
2000
|
Seismic Guide for Power Transformers and Reactors
|
|
IEEE-C57.115
|
2000
|
Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65 Degrees C W
|
|
IEEE-C57.116
|
1989
|
Guide for Transformers Directly Connected to Generators R(2000)
|
|
IEEE-C57.117
|
2000
|
Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power
|
|
IEEE-C57.119
|
2000
|
Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loa
|
|
IEEE-C57.12.00
|
2000
|
General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
IEEE-C57.12.01
|
2000
|
Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with
|
|
IEEE-C57.12.10
|
2000
|
Requirements for Liquid-Immersed Power Transformers
|
|
IEEE-C57.12.11
|
2000
|
Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating)
|
|
IEEE-C57.12.12
|
2000
|
Guide for Installation of Oil-Immersed EHV Transformers 345 kV and Above - Supplement to ANSI IEEE C
|
|
IEEE-C57.12.20
|
2000
|
Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below
|
|
IEEE-C57.12.21
|
2000
|
Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers
|
|
IEEE-C57.12.22
|
2000
|
Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers Wi
|
|
IEEE-C57.12.23
|
2000
|
Submersible Single-Phase Transformers: 167 kVA and Smaller
|
|
IEEE-C57.12.24
|
2000
|
Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY 19 920 Volts
|
|
IEEE-C57.12.25
|
2000
|
Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers wi
|
|
IEEE-C57.12.26
|
2000
|
Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for
|
|
IEEE-C57.12.28
|
2000
|
Pad-Mounted EquipmentEnclosure Integrity
|
|
IEEE-C57.12.29
|
2000
|
IEEE Standard for Pad-Mounted Equipment-Enclosure Integrity for Coastal Environments
|
|
IEEE-C57.12.30
|
2000
|
Pole-Mounted Equipment-Enclosure Integrity for Coastal Environments
|
|
IEEE-C57.12.31
|
2000
|
Pole-Mounted Equipment-Enclosure Integrity
|
|
IEEE-C57.12.32
|
2000
|
Standard for Submersible Equipment-Enclosure Integrity
|
|
IEEE-C57.12.34
|
2000
|
Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers
|
|
IEEE-C57.12.35
|
2000
|
Bar Coding for Distribution Transformers and Step-Voltage Regulators
|
|
IEEE-C57.12.36
|
2000
|
Standard Requirements for Liquid-Immersed Distribution Substation Transformers
|
|
IEEE-C57.12.37
|
2000
|
IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
|
|
IEEE-C57.12.38
|
2000
|
Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers
|
|
IEEE-C57.12.40
|
2000
|
Network, Three-Phase Transformers, 2500 kVA and Smaller
|
|
IEEE-C57.12.44
|
2000
|
Standard Requirements for Secondary Network Protectors
|
|
IEEE-C57.12.50
|
2000
|
Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 t
|
|
IEEE-C57.12.51
|
2000
|
Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 V to
|
|
IEEE-C57.12.52
|
2000
|
Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500
|
|
IEEE-C57.12.55
|
2000
|
Transformers Used in Unit Installations, Including Unit SubstationsConformance Standard - Replaces N
|
|
IEEE-C57.12.56
|
2000
|
Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power a
|
|
IEEE-C57.12.57
|
2000
|
Transformers Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Vol
|
|
IEEE-C57.12.58
|
2000
|
Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
|
|
IEEE-C57.12.59
|
2000
|
Guide for Dry-Type Transformer Through-Fault Current Duration
|
|
IEEE-C57.12.60
|
2000
|
Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Tran
|
|
IEEE-C57.12.70
|
2000
|
Standard Terminal Markings and Connections for Distribution and Power Transformers
|
