|
EN-753-3
|
1999
|
Identification Card Systems - Intersector Thin Flexible Cards - Part 3: Test Methods (S)
|
|
EN-754-1
|
1997
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 1: Technical Conditions for Inspec
|
|
EN-754-2
|
1997
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 2: Mechanical Properties (V)
|
|
EN-754-3
|
1996
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 3: Round Bars, Tolerances on Dimen
|
|
EN-754-4
|
1996
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 4: Square Bars, Tolerances on Dime
|
|
EN-754-6
|
1996
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube Part 6: Hexagonal Bars, Tolerances on D
|
|
EN-754-7
|
1998
|
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 7: Seamless Tubes, Tolerances on
|
|
EN-755-3
|
1996
|
Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 3: Round Bars, Tolerances
|
|
EN-755-4
|
1996
|
Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles Part 4: Square Bars, Tolerance
|
|
EN-755-5
|
1996
|
Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 5: Rectangular Bars, To
|
|
EN-755-6
|
1996
|
Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 6: Hexagonal Bars, Tole
|
|
EN-755-7
|
1998
|
Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 7: Seamless Tubes, Toler
|
|
EN-755-8
|
1998
|
Aluminium and Aluminium Alloys - Extruded Rod/Bar; Tube and Profiles - Part 8: Porthole Tubes, Toler
|
|
EN-755-9
|
2001
|
Corr 1 Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 9: Profiles, Tole
|
|
EN-756
|
1996
|
Welding Consumables - Wire Electrodes and Wire-Flux Combinations for Submerged Arc Welding of Non Al
|
|
EN-757
|
1997
|
Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of High Strength Steels - Clas
|
|
EN-758
|
1997
|
Welding Consumables - Tubular Cored Electrodes for Metal Arc Welding with and without a Gas Shield o
|
|
EN-759
|
1997
|
Welding Consumables - Technical Delivery Conditions for Welding Filler Metals - Type of Product, Dim
|
|
EN-760
|
1996
|
Welding Consumables Fluxes for Submerged Arc Welding Classification (F)
|
|
EN-763
|
1995
|
Plastics Piping and Ducting Systems - Injection-Moulded Thermoplastics Fittings - Test Method for Vi
|
|
EN-764
|
1995
|
Pressure Equipment - Terminology and Symbols - Pressure, Temperature, Volume (Q)
|
|
EN-764-2
|
2002
|
Pressure Equipment - Part 2: Quantities, Symbols and Units (Q)
|
|
EN-764-3
|
2002
|
Pressure Equipment - Part 3: Definition of Parties Involved (Q)
|
|
EN-764-4
|
2002
|
Pressure equipment Part 4: Establishment of technical delivery conditions for metallic materials (Q)
|
|
EN-764-5
|
2002
|
Pressure Equipment Part 5: Compliance and Inspection Documentation of Materials (Q)
|
|
EN-764-7
|
2002
|
Pressure Equipment - Part 7: Safety Systems for Unfired Pressure Vessels (Q)
|
|
EN-765
|
1994
|
Sacks for the Transport of Food Aid - Sacks Made of Woven Polyolefin Fabric Other Than Polypropylene
|
|
EN-772-11
|
2007
|
Masonry unitsR08;Determination of capillary absorption coefficient foraggregate concrete masonry uni
|
|
EN-772-16
|
2005
|
Methods of test for masonry units R08; Determination of Dimensions
|
|
EN-773
|
1999
|
General Requirements for Components Used in Hydraulically Pressurized Discharge Pipes, Drains and Se
|
|
EN-774
|
1996
|
Amd 2 Garden Equipment - Hand Held, Integrally Powered Hedge Trimmers - Safety AMD 13220; October 30
|
|
EN-777-1
|
1999
|
Corr 1 Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 1: Sy
|
|
EN-777-2
|
1999
|
Amd 3 Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 2: Sys
|
|
EN-777-3
|
2000
|
Amd 3 Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 3: Sys
|
|
EN-777-4
|
1999
|
Amd 3 Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 4: Sys
|
|
EN-778
|
1998
|
Amd 1 Domestic Gas-Fired Forced Convection Air Heaters for Space Heating Not Exceeding a Net Heat In
|
|
EN-779
|
2002
|
Particulate air filters for general ventilation - Determination of the filtration performance (N)
|
|
EN-786
|
1996
|
Amd 1 Garden Equipment - Electrically Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge
|
|
EN-790
|
2001
|
Inland Navigation Vessels - Stairs with Inclination Angles of 45 Degree to 60 Degree - Requirements,
|
|
EN-791
|
1996
|
Drill Rigs - Safety (Q)
|
|
EN-793
|
1998
|
Particular Requirements for Safety of Medical Supply Units (N)
|
|
EN-794-1
|
1997
|
Amd 1 Lung Ventilators - Part 1: Particular Requirements for Critical Care Ventilators AMD 13084: Ju
|
|
EN-794-2
|
1997
|
Lung Ventilators Part 2: Particular Requirements for Home Care Use Also Known as BS 5724: Section 2.
|
|
EN-794-3
|
1999
|
Lung Ventilators - Part 3: Particular Requirements for Emergency and Transport Ventilators (N)
|
|
EN-795
|
1997
|
Amd 1 Protection Against Falls from a Height - Anchor Devices - Requirements and Testing AMD 13006:
|
|
EN-796
|
1996
|
Bar Coding - Symbology Identifiers (S)
|
|
EN-797
|
1998
|
BAR CODING - SYMBOLOGy - Specifications - EAN/UPC
|
|
EN-799
|
1996
|
Bar Coding - Symbology Specifications - 'Code 128' (S)
|
|
EN-80
|
2001
|
Wall-Hung Urinals - Connecting Dimensions (R)
|
|
EN-800
|
1996
|
Bar Coding - Symbology Specifications - 'Code 39' (S)
|
