|
EN-209
|
2000
|
Steel Drums - Removable Head (Open Head) Drums with a Minimum Total Capacity of 210 l Supersedes BS
|
|
EN-2090
|
2006
|
Aerospace series ? -Aluminium alloy AL-P2024-T3 ? - Clad sheet and strip 0,3 mm ? a ? 6 mm;German a
|
|
EN-2092
|
1994
|
Aluminium Alloy AL-P7075-T6 or T62; Clad Sheet and Strip 0,4 mm Less Than or Equal to a Less Than or
|
|
EN-210
|
2000
|
Steel Drums - Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 216,5 l Superse
|
|
EN-210634
|
1992
|
Water Quality - Guidance for the Evaluation in an Aqueous Medium of the "Ultimate" Biodegradability
|
|
EN-211949
|
1993
|
Cold-Reduced Electrolytic Tinplate
|
|
EN-211950
|
1993
|
Cold-Reduced Electrolytic Chromium/Chromium Oxide Coated Steel
|
|
EN-2130
|
2001
|
Bearings, Precision Ball in Corrosion Resisting Steel for Instruments and Equipment - Technical Spec
|
|
EN-2131
|
2002
|
Plates in Alumimium Alloys - Thickness 6 mm Less Than a Less Than or Equal to 160 mm - Dimensions (S
|
|
EN-2133
|
1998
|
Cadmium Plating of Steels with Specified Tensile Strength Less Than or Equal To 1 450 MPa, Copper, C
|
|
EN-2134
|
2002
|
Round Bars, Extruded in Aluminium and Aluminium Alloys - Diameter 10 mm Less Than or Equal to D Less
|
|
EN-2138
|
2000
|
Washers, Flat, in Steel, Cadmium Plated (S)
|
|
EN-2143
|
1993
|
Rivets, Solid, Universal Head, in Aluminium 1050A, Inch Based Series
|
|
EN-215-1
|
1991
|
Thermostatic Radiator Valves Part 1: Requirements and Test Methods (Replaces BS 6284: 1983)
|
|
EN-21-564
|
1991
|
Dental Agar Impression Material (Replaces BS 5794: 1979) (N)
|
|
EN-21942-1
|
1992
|
Dental Vocabulary Part 1: General and Clinical Terms (ISO 1942-1: 1989) (Replaces BS 4492: 1983)
|
|
EN-21942-2
|
1993
|
Dental Vocabulary Part 2: Dental Materials (ISO 1942-2: 1989) (Replaces BS 4492: 1983) (N)
|
|
EN-21942-3
|
1994
|
Dental Vocabulary Part 3: Dental Instruments (ISO 1942-3: 1989) (N)
|
|
EN-21942-4
|
1994
|
Dental Vocabulary Part 4: Dental Equipment (ISO 1942-4: 1989) (N)
|
|
EN-21974
|
1994
|
Amd 1 Paper - Determination of Tearing Resistance (Elmendorf Method) (ISO 1974: 1990) (AMD 8176) Dec
|
|
EN-22063
|
1994
|
Metallic and Other Inorganic Coatings - Thermal Spraying - Zinc, Aluminium and Their Alloys (Replace
|
|
EN-22247
|
1993
|
Amd 1 Complete, Filled Transport Packages. Method for Determination of Resistance to Fixed Low Frequ
|
|
EN-2235
|
2006
|
Single and multicore electrical cables,screened and jacketed
|
|
EN-2243-2
|
1991
|
Test Methods for Structural Adhesives Part 2: Peel Metal-Metal
|
|
EN-2243-3
|
1992
|
Structural Adhesives. Test Methods Part 3: Peeling Test Metal-Honeycomb Core
|
|
EN-2243-4
|
1991
|
Test Methods for Structural Adhesives Part 4: Metal-Honeycomb Core Flatwise Tensile Test
|
|
EN-2243-5
|
1992
|
Test Methods for Structural Adhesives Part 5: Ageing Tests
|
|
EN-2243-6
|
2006
|
Aerospace series-Non-metallic materials-Structural adhesives-Test method-Part 6: Determination of sh
|
|
EN-22553
|
1995
|
Welded, Brazed and Soldered Joints - Symbolic Representation on Drawings (ISO 2553: 1992) (Replaces
|
|
EN-2256
|
2006
|
Aerospace series-Aluminium alloy AL-P2618A-T852-Hand and die forgings – a ? 150 mm;German and Englis
|
|
EN-2257
|
1997
|
Circular Tubes for Structures in Aluminium and Aluminium Alloys - Diameter 6 mm Less Than or Equal t
|
|
EN-2266-002
|
2005
|
Cables, electrical, forgeneral purpose-Operating temperatures between p55 °C and 200 °C-Part 002: Ge
|
|
EN-2266-003
|
2005
|
Cables, electrical, for general purpose-Operating temperatures between ??55 ??C
and 200??C-Part 003
|
|
EN-2266-005
|
2006
|
Aerospace series ? -Cables, electrical, for general purpose ? Operating temperatures between -55 °C
|
|
EN-2266-007
|
2006
|
Aerospace series ?-Cables,electrical,for general purpose? -Operating temperatures between-55°Cand200
|
|
EN-2267-002
|
2005
|
Cables, electrical, for general purpose-Operating temperatures between-55°Cand260 °C-Part002:General
|
|
EN-2267-003
|
2005
|
Cables, electrical, for general purpose-Operating temperatures between ??55??C and260??C-Part003: In
|
|
EN-2267-007
|
2005
|
Cables, electrical,for general purpose-Operating temperatures between ??55°C and 260°C-Part 007: DMA
|
|
EN-2267-008
|
2005
|
Cables, electrical, for general purpose-Operating temperatures between p55 °C and 260 °CPart 008: DM
|
|
EN-2267-009
|
2006
|
Aerospace series-Cables,electrical, for general purpose-Operating temperatures between-55°Cand260°C-
|
|
EN-2267-010
|
2006
|
Aerospace series-Cables,electrical,for general purpose-Oper. temp. btwn 55° C and 260°C-Part010:DR f
|
|
EN-22719
|
1994
|
Methods of Test for Petroleum and Its Products Part 404: Petroleum Products and Lubricants - Determi
|
|
EN-22768-1
|
1993
|
General Tolerances Part 1: Tolerances for Linear and Angular Dimensions without Individual Tolerance
|
|
EN-22768-2
|
1993
|
General Tolerances Part 2: Geometrical Tolerance for Features without Individual Tolerance Indicatio
|
|
EN-228
|
2000
|
Automotive Fuels - Unleaded Petrol - Requirements and Test Methods (W)
|
|
EN-2283
|
1996
|
Testing of Aircraft Wiring (S)
|
|
EN-22858
|
1993
|
End-Suction Centrifugal Pumps (Rating 16 Bar) - Designation, Nominal Duty Point and Dimensions (ISO
|
|
EN-22873
|
1993
|
Amd 1 Complete, Filled Transport Packages. Method for Determination of Resistance to Low Pressure (I
|
|
EN-230
|
2008
|
Automatic burner control systems for oil burners
|
|
EN-23035
|
1994
|
Single-Faced and Single-Wall Corrugated Fibreboard - Determination of Flat Crush Resistance (ISO 303
|
