|
DIN-LN-29984
|
1977
|
Nuts Anchor; Self-Locking; Deep Counterbore; Single Lug for Temperatures up to 235 Degrees C (July)
|
|
DIN-LN-29985
|
1977
|
Nuts Anchor; Self-Locking; Floating; Deep Counterbore; Double Lug for Temperatures up to 235 Degrees
|
|
DIN-LN-29986
|
1977
|
Anchor Nuts; Self-Locking, Floating, Deep Counterbore, Double Lug, Miniature, for Temperatures up to
|
|
DIN-LN-29987
|
1977
|
Nuts Anchor; Self-Locking; Floating; Deep Counterbore; Single Lug for Temperatures up to 235 Degrees
|
|
DIN-LN-29988
|
1977
|
Nuts Anchor; Self-Locking; Deep Counterbore; Corner Lug for Temperatures up to 235 Degrees C (July)
|
|
DIN-LN-29989
|
1977
|
Nuts Anchor; Self-Locking; Deep Counterbore; Corner Lug Reduced for Temperatures up to 235 Degrees C
|
|
DIN-LN-29990
|
1977
|
Anchor Nuts; Self-Locking, Deep Counterbore, Double Lug, for Temperatures up to 315 Degrees C and up
|
|
DIN-LN-29991
|
1977
|
Anchor Nuts; Self-Locking, Deep Counterbore, Double Lug, Miniature for Temperatures up to 315 Degree
|
|
DIN-LN-29992
|
1977
|
Nuts, Anchor; Self-Locking, Deep Counterbore, Single Lug for Temperatures up to 315 Degrees C and up
|
|
DIN-LN-29993
|
1974
|
Gang Channel Nuts; Deep Counterbore, Self-Locking, Floating for Temperatures up to 120 Degrees C (Oc
|
|
DIN-LN-29996
|
1977
|
Nuts Anchor; Self-Locking; Deep Counterbore; Single Lug Reduced for Temperatures up to 315 Degrees C
|
|
DIN-LN-29999-1
|
1974
|
TORQ-SET Recesses; Dimensions (Aug)
|
|
DIN-LN-29999-2
|
1974
|
TORQ-SET Recesses; Penetration Gauges (Aug)
|
|
DIN-LN-29999-3
|
1974
|
TORQ-SET Recesses; Screwdriver Points (Aug)
|
|
DIN-LN-65009
|
1978
|
Aerospace; Bolts, Steel, with 1100 N/mm2 and 1250 N/mm2 Nominal Tensile Strength, for Temperature up
|
|
DIN-LN-65010-1
|
1968
|
Specification for Screws and Bolts of Unalloyed and Low-Alloy Steel with Minimum Tensile Strength up
|
|
DIN-LN-65010-2
|
1968
|
Specification for Screws and Bolts of Unalloyed and Low-Alloy Steel with Minimum Tensile Strength up
|
|
DIN-LN-65013
|
1969
|
Specification for Steel Fasteners with Minimum Tensile Strengths of 1550 N/mm2 and 1800 N/mm2 for Te
|
|
DIN-LN-65015
|
1970
|
Nuts from Steel for Screws with Minimum Tensile Strength of 900 N/mm2 and 1100 N/mm2; Technical Spec
|
|
DIN-LN-65016
|
1970
|
Self-Locking Nuts for Temperatures up to 425 Degrees C; Procurement Specification (Dec)
|
|
DIN-LN-65018-1
|
1968
|
Manufacturer's Acceptance Certificate for Screws and Bolts (Sept)
|
|
DIN-LN-65018-2
|
1968
|
Manufacturer's Acceptance Certificate for Nuts and Self-Locking Nuts (Sept)
|
|
DIN-LN-65019
|
1977
|
Bolts, Countersunk Head with TORQ-SET Recess (Dec)
|
|
DIN-LN-65020
|
1970
|
Rivet Wires and Rivets of Aluminium and Wrought Aluminium Alloys; Technical Specification (Jan)
|
|
DIN-LN-65022
|
1980
|
Aerospace; Pan Head Screws with TORQ-SET Recess; Threaded to Head (Mar)
|
|
DIN-LN-65047-1
|
1978
|
Aerospace; Bolts, Close Tolerance, in Titanium Alloy, with Self-Locking Collars in Aluminium Alloy;
|
|
DIN-LN-65047-2
|
1978
|
Aerospace; Bolts, Close Tolerance, in Titanium Alloy, with Self-Locking Collars in Aluminium Alloy;
|
|
DIN-LN-65072-1
|
1970
|
Fasteners Made of Titanium Alloy; Technical Specification (Dec)
|
|
DIN-LN-65100
|
1975
|
Self-Locking Nuts for Temperature Class 650 Degrees C; Procurement Specification (Jan)
|
|
DIN-LN-9016
|
1980
|
Aerospace; Washers; Bevelled (Apr)
|
|
DIN-LN-9025
|
1980
|
Aerospace; Washers (Apr)
|
|
DIN-LN-9028
|
1980
|
Aerospace; Counterbored Washers (Apr)
|
|
DIN-LN-9038
|
1981
|
Aerospace; Screws, Hexagon Head, Fully Threaded (Dec)
|
|
DIN-LN-9051
|
1972
|
Identification Marking of Controlled Components in Manufacturing Aircraft and Space Vehicles (Aug)
|
|
DIN-LN-9051-1
|
1972
|
Identification Marking of Controlled Components in Manufacturing Aircraft and Space Vehicles; Exampl
|
|
DIN-LN-9136
|
1981
|
Aerospace; Bolts, Countersunk Head, Cross-Recessed, Non Magnetic (Dec)
|
|
DIN-LN-9139
|
1983
|
Aerospace; Screws, Round Head, with Cross Recess; Non-Magnetic (June)
|
|
DIN-LN-9161
|
1977
|
Nuts Hexagon Flanged; Self-Locking for Temperatures up to 315 Degrees C and up to 425 Degrees C (May
|
|
DIN-LN-9163-1
|
1980
|
Aerospace; ISO Metric Threads; Basic Deviations and Tolerances (Dec)
|
|
DIN-LN-9163-11
|
1980
|
Aerospace; ISO Metric Threads; Survey, Designation in Manufacturing Documents (Dec)
|
|
DIN-LN-9163-2
|
1980
|
Aerospace; ISO Metric Threads; Selection of Threads and Allowances for Screws, Bolts and Nuts (Dec)
|
|
DIN-LN-9163-3
|
1980
|
Aerospace; ISO Metric Threads; Selection of Threads and Allowances for Pipe and Hose Fittings (Dec)
|
|
DIN-LN-9163-4
|
1980
|
Aerospace; ISO Metric Threads; Selection of Threads and Allowances for Operating Elements (Dec)
|
|
DIN-LN-9163-5
|
1980
|
Aerospace; ISO Metric Threads; Selection of Threads and Allowances for Engines (Dec)
|
|
DIN-LN-9163-6
|
1980
|
Aerospace; ISO Metric Threads; Limits (Dec)
|
|
DIN-LN-9163-7
|
1980
|
Aerospace; ISO Metric Threads; Selection of Threads and Allowances for Structural Parts (Dec)
|
|
DIN-LN-9338
|
1985
|
Aerospace; Nuts Hexagon Flanged; Self-Locking for Temperatures up to 235 Degrees C (Feb)
|
|
DIN-LN-9343
|
1985
|
Aerospace; Nuts, Hexagon (Feb)
|
|
DIN-LN-9345
|
1980
|
Aerospace; Nuts, Castle (Aug)
|
|
DIN-LN-9368-1
|
1983
|
Aerospace; Designation of Surface Treatments; Composition of Code Numbers; Indications on Design Doc
|
