|
ASME-B18.2.8
|
1999
|
Clearance Holes for Bolts, Screws, and Studs
|
|
ASME-B18.2.9
|
2010
|
Straightness Gage and Gaging for Bolts and Screws
|
|
ASME-B18.21.1
|
1999
|
Lock Washers (Inch Series)
|
|
ASME-B18.21.2M
|
1999
|
Lock Washers (Metric Series)
|
|
ASME-B18.21.3
|
2008
|
Double Coil Helical Spring Lock Washers for Wood Structures
|
|
ASME-B18.22.1
|
1965
|
Plain Washers Reaffirmation and Redesignation of ASA B27.2-1965 R(1998)
|
|
ASME-B18.22M
|
1981
|
Metric Plain Washers R(2000)
|
|
ASME-B18.24
|
2004
|
Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
|
|
ASME-B18.24.1
|
1996
|
Part Identifying Number (PIN) Code System Standard for B18 Externally Threaded Products
|
|
ASME-B18.24.2
|
1998
|
Part Identifying Number (PIN) Code System Standard for B18 Internally Threaded Products
|
|
ASME-B18.24.3
|
1998
|
Part Identifying Number (PIN) Code System Standard for B18 Nonthreaded Products
|
|
ASME-B18.24A
|
2006
|
Part Identifying Number (PIN) Code System Standard for B18 Fastener Products
|
|
ASME-B18.25.1M
|
1996
|
Square and Rectangular Keys and Keyways
|
|
ASME-B18.25.2M
|
1996
|
Woodruff Keys and Keyways
|
|
ASME-B18.25.3M
|
1998
|
Square and Rectangular Keys and Keyways: Width Tolerances and Deviations Greater than Basic Size
|
|
ASME-B18.2-5M
|
2013
|
Metric 12-Point Flange Head Screws
|
|
ASME-B18.27
|
1998
|
Tapered and Reduced Cross Section Retaining Rings (Inch Series) Incorporating ASME B18.27.1, B18.27.
|
|
ASME-B18.2-9
|
2010
|
Straightness Gage and Gaging for Bolts and Screws
|
|
ASME-B18.29.1
|
1993
|
Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series) Errata - August 199
|
|
ASME-B18.29.2M
|
2005
|
Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series)
|
|
ASME-B18.3
|
1998
|
Socket Cap, Shoulder, and Set Screws, Hex and Spline Keys (Inch Series)
|
|
ASME-B18.3.1M
|
1986
|
Socket Head Cap Screws (Metric Series) R(2002)
|
|
ASME-B18.3.2M
|
1979
|
Metric Series Hexagon Keys and Bits R(1998)
|
|
ASME-B18.3.3M
|
1986
|
Hexagon Socket Head Shoulder Screws (Metric Series) R(2002)
|
|
ASME-B18.3.4M
|
1986
|
Hexagon Socket Button Head Cap Screws (Metric Series) R(2002)
|
|
ASME-B18.3.5M
|
1986
|
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) R(2002)
|
|
ASME-B18.3.6M
|
1986
|
Metric Series Socket Set Screws R(2002)
|
|
ASME-B18.30.1M
|
2000
|
Open-End Blind Rivets with Break Mandrels (Metric Series)
|
|
ASME-B18.31.1M
|
2008
|
Metric Continuous and Double-End Studs
|
|
ASME-B18.31.2
|
2008
|
Continuous and Double-End Studs (Inch Series)
|
|
ASME-B18.31.3
|
2009
|
Threaded Rods (Inch Series)
|
|
ASME-B18.31.4M
|
2009
|
Threaded Rod (Metric Series)
|
|
ASME-B18.31.5
|
2011
|
Bent Bolts (Inch Series)
|
|
ASME-B18.5
|
1990
|
Round Head Bolts (Inch Series) R(1998)
|
|
ASME-B18.5.2.1M
|
1996
|
Metric Round Head Short Square Neck Bolts Erratum - October 2001
|
|
ASME-B18.5.2.2M
|
1982
|
Metric Round Head Square Neck Bolts R(2000)
|
|
ASME-B18.5.2.3M
|
1990
|
Round Head Square Neck Bolts with Large Head (Metric Series) R(1998)
|
|
ASME-B18.5.2M
|
1982
|
Metric Round Head Square Neck Bolt
|
|
ASME-B18.6.1
|
1981
|
Wood Screws (Inch Series) R(1997)
|
|
ASME-B18.6.2
|
1998
|
Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws (Inch Series)
|
|
ASME-B18.6.3
|
1998
|
Machine Screws and Machine Screw Nuts
|
|
ASME-B18.6.4
|
1998
|
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series)
|
|
ASME-B18.6.5M
|
2000
|
Metric Thread-Forming and Thread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M
|
|
ASME-B18.6.7M
|
1999
|
Metric Machine Screws 2000 Edition; Revision of ASME B18.6.7M-1985(1993)
|
|
ASME-B18.6.8
|
2010
|
Thumb Screws and Wing Screws (Inch Series)
|
|
ASME-B18.6.9
|
2010
|
Wing Nuts (Inch Series)
|
|
ASME-B18.7
|
1972
|
General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps R(2001)
|
|
ASME-B18.7.1M
|
1984
|
Metric General Purpose Semi-Tubular Rivets R(2000)
|
|
ASME-B18.8.1
|
1994
|
Clevis Pins and Cotter Pins (Inch Series) Errata - April 1995 R(2000)
|
|
ASME-B18.8.100M
|
2000
|
Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pin
|
