|
DIN-17673-4
|
1974
|
Drop Forgings of Copper and Wrought Copper Alloys; Permissible Variations (Jan)
|
|
DIN-17674-3
|
1963
|
Copper and Wrought Copper Alloy Extruded Sections; Design (June)
|
|
DIN-17674-4
|
1963
|
Copper and Copper Wrought Alloy Extruded Sections; Extruded, Permissible Variations (June)
|
|
DIN-17674-5
|
1963
|
Copper and Wrought Copper Alloy Extruded Sections; Drawn; Permissible Variations (June)
|
|
DIN-17678-1
|
1983
|
Wrought Copper and Copper Alloy Hand Forgings; Properties (Dec)
|
|
DIN-17678-2
|
1973
|
Hand Forgings of Copper and Wrought Copper Alloys; Technical Conditions of Delivery (Nov)
|
|
DIN-17678-3
|
1973
|
Hand Forgings of Copper and Wrought Copper Alloys; Basis of Design (Dec)
|
|
DIN-17678-4
|
1973
|
Hand Forgings of Copper and Wrought Copper Alloys; Permissible Variations (Dec)
|
|
DIN-17679
|
1983
|
Wrought Copper and Copper Alloy Tubes with Rolled Fins for Use in Heat Exchangers (Oct)
|
|
DIN-1769
|
1986
|
Wrought Aluminium and Aluminium Alloy Drawn Rectangular Bars with Square Edges; Dimensions, Dimensio
|
|
DIN-1770
|
1987
|
Wrought Aluminium and Aluminium Alloy Extruded Rectangular Bars; Dimensions, Dimensional Deviations
|
|
DIN-1771
|
1981
|
Aluminium and Wrought Aluminium Alloy; Extruded Angles; Dimensions; Static Values September
|
|
DIN-17745
|
1973
|
Wrought Alloys of Nickel and Iron; Composition (Jan)
|
|
DIN-178
|
1969
|
Bright Square Steel; Dimensions, Permissible Variations, Weights
|
|
DIN-17800
|
1961
|
Commercially Pure Magnesium (July)
|
|
DIN-1783
|
1981
|
Strips, Plates and Sheets of Aluminium and Wrought Aluminium Alloys with Thicknesses over 0,35 mm, C
|
|
DIN-1785
|
1983
|
Wrought Copper and Copper Alloy Tubes for Condensers and Heat Exchangers October
|
|
DIN-17850
|
1990
|
Titanium; Chemical Composition (Nov)
|
|
DIN-17851
|
1990
|
Titanium Alloys; Chemical Composition (Nov)
|
|
DIN-17860
|
1990
|
Titanium and Titanium Alloy Plate, Sheet and Strip; Technical Delivery Conditions (Nov)
|
|
DIN-17861
|
1990
|
Seamless Circular Titanium and Titanium Alloy Tubes; Technical Delivery Conditions (Nov)
|
|
DIN-17862
|
1993
|
Titanium and Titanium Alloy Bars; Technical Delivery Conditions (Feb)
|
|
DIN-17863
|
1973
|
Wire of Titanium (Nov)
|
|
DIN-17864
|
1993
|
Titanium and Wrought Titanium Alloy Forgings (Hammer Forgings and Drop Forgings); Technical Delivery
|
|
DIN-17865
|
1990
|
Titanium and Titanium Alloy Investment Castings and Rammed Graphite Castings; Technical Delivery Con
|
|
DIN-17866
|
1990
|
Welded Circular Titanium and Titanium Alloy Tubes; Technical Delivery Conditions (Nov)
|
|
DIN-17869
|
1992
|
Properties of Titanium and Titanium Alloys; Information Relating to DIN 17860 Through DIN 17866 (Jun
|
|
DIN-1787
|
1973
|
Copper; Half-Finished Products January
|
|
DIN-1791
|
1973
|
Strip and Strip Cut to Length of Copper and Wrought Copper Alloys; Cold Rolled; Dimensions June
|
|
DIN-1795
|
1987
|
Wrought Aluminium and Aluminium Alloy Seamless Drawn Round Tubes; Dimensions, Dimensional Tolerances
|
|
DIN-1795-2
|
1987
|
Wrought Aluminium and Aluminium Alloy Seamless Drawn Round Tubes; Tolerances for Preferred Sizes Mar
|
|
DIN-1796
|
1986
|
Wrought Aluminium and Aluminium Alloy Drawn Square Bars with Sharp Edges; Dimensions, Dimensional De
|
|
DIN-1797
|
1986
|
Wrought Aluminium and Aluminium Alloy Drawn Hexagonal Bars with Sharp Edges; Dimensions, Dimensional
|
|
DIN-1798
|
1986
|
Wrought Aluminium and Aluminium Alloy Drawn Round Bars; Dimensions, Dimensional Deviations and Form
|
|
DIN-1799
|
1986
|
Wrought Aluminium and Aluminium Alloy Extruded Round Bars; Dimensions, Dimensional Deviations and Fo
|
|
DIN-18000
|
1984
|
Modular Coordination in Building (May)
|
|
DIN-18001
|
1991
|
DETERMINATION OF MINIMUM AREAS FOR FURNISHING RESIDENTIAL
DWELLINGS
|
|
DIN-18015-1
|
1992
|
Electrical Installations in Dwellings; Design Principles (Mar)
|
|
DIN-18015-2
|
1996
|
Electrical Installations in Dwellings Part 2: Requirements for Minimum Equipment August
|
|
DIN-18015-3
|
1990
|
Electrical Installations in Dwellings; Circuit Arrangement and Location of Electrical Equipment (Jul
|
|
DIN-18017
|
1994
|
Code of Practice of Ventilation of Bathnooms and wash R08; down out sidewindows without ventilatros
|
|
DIN-18034
|
1991
|
Code of praxis of basic principhls of design sport and entertaining sights
|
|
DIN-18035
|
1994
|
Code of practice: sport spaces
|
|
DIN-18035-2
|
1979
|
Sports Grounds; Watering of Turfed Areas and Tamped Areas (Jan)
|
|
DIN-18035-3
|
1978
|
Sports Grounds; Drainage (Dec)
|
|
DIN-18035-8
|
1978
|
Sports Grounds; Athletics Facilities (Jan)
|
|
DIN-18038
|
1982
|
Sports Halls; Squash Centres; Principles for Planning and Construction (Apr)
|
|
DIN-1804
|
1971
|
Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread March
|
|
DIN-18052
|
1992
|
CODE OF PRACTICE OF PLAIN WOODEN WINDOWS OF RESIDENTIAL
BUILDINGS
|
|
DIN-1806
|
1964
|
Taper Shanks for Cotter Retention June
|
